Workshops

Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the Inkscape and Fusion handouts.

Date/Time	Topic	Instructors	Pre-requisites
10/5/19 9:30AM	Inkscape II for intermediate users	Robert, Ian	Some experience designing with Inkscape. Bring laptop with Inkscape installed.
11/3/19 9:30AM	Inkscape II for intermediate users	Robert, Ian	Some experience designing with Inkscape. Bring laptop with Inkscape installed.
9/28/19 9:30AM	Fusion360 I Introduction for beginners	Elena, Kyra	Install Fusion360 software on your laptop and bring it to class
10/26/19 9:30AM	Fusion360 I Introduction for beginners	Elena, Kyra	Install Fusion360 software on your laptop and bring it to class
10/19/19 9:30AM	Water Jet Cutter	Dylan, Robert	must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
11/9/19 9:30AM	Water Jet Cutter	Dylan, Robert	must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
Fall 2019 date TBA	CAD on the Carvey (requires Fusion360 I)	instructors TBA
Fall 2019 date TBA	Inkscape I for beginners	Robert, Ian
Fall 2019 date TBA	Fusion360 II More features	instructors TBA

Handouts used in these seminars

---

Inkscape I for Beginners

---

Inkscape II for intermediate users

---

Fusion360 I Introduction to 3D printing

---

Fusion360 II More features

---

File:Put a filename here CAD on the Carvey

---

File:Put a filename here Meshmixer for editing STL files