Ultimaker 2: Difference between revisions
Jump to navigation
Jump to search
Clayton.ford (talk | contribs) No edit summary |
Clayton.ford (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
[[File:Ultimaker2.JPG|250px|thumb|right|Example Image of an Ultimaker 2]] | [[File:Ultimaker2.JPG|250px|thumb|right|Example Image of an Ultimaker 2]] | ||
The Ultimaker 2 is | The Ultimaker 2 is the simplest of the [[3d printers]] in the MakerSpace, and so is likely the easiest for beginners to 3d printing to get started with. | ||
== Cura Configuration == | == Cura Configuration == | ||
Open the LulzBot version of [[Cura]] and follow the following steps: | Open the LulzBot version of [[Cura]] and follow the following steps: | ||
Revision as of 14:04, 29 September 2015
The Ultimaker 2 is the simplest of the 3d printers in the MakerSpace, and so is likely the easiest for beginners to 3d printing to get started with.
Cura Configuration
Open the LulzBot version of Cura and follow the following steps:
- Click the "Machine" drop-down menu and select "Add New Machine".
- Select "Other Printers" and click next.
- Select "Ultimaker 2" and click next.
- Click "Finish".
Recommended Print Configurations
Ultimaker 2 Print Configurations
Technical Details
- 0.4mm nozzle
- 260C maximum extruder temperature
- 100C maximum bed temperature
- Glass print bed
- Print Area: 223 x 223 x 205 mm
- Top Print Speed: 300mm/sec
Bed Leveling
The bed leveling procedure is a menu option on the Ultimaker 2. Select it and follow the on-screen instructions in order to level the bed.