Bending Brake
Bending Brake
![](/images/e/e3/Brake_2.jpg)
This tool can be used to bend sheet metal (no thicker than 16ga steel) at angles up to 135 degrees. Maximum width is 50 inches.
Required Badge | Required PPE | ||||
---|---|---|---|---|---|
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.
This machine is covered under the Metal-1 training. Users who have not completed this training cannot use this machine.
Machine Info
This machine is a Jet, model BPB 1650.