LulzBot TAZ 5 Print Configurations

From makerspace.tulane.edu
Revision as of 14:33, 29 September 2015 by Clayton.ford (talk | contribs)
Jump to navigation Jump to search

This page contains 3d printing configuration information specific to the LulzBot TAZ 5. For preparing any print for this printer, make sure that you select "Lulzbot Taz 5 (0.5 Nozzle)" under "Machine" in Cura. If that option is not present, you may need to follow the Cura configuration instructions for this printer, or may need to install the latest LulzBot version of Cura.

PLA

ABS

HIPS

Retrieved from "http://makerspace.tulane.edu/index.php?title=LulzBot_TAZ_5_Print_Configurations&oldid=325"