Ultimaker 2 Print Configurations

From makerspace.tulane.edu
Revision as of 02:18, 29 September 2015 by Clayton.ford (talk | contribs) (Created page with "PLA: <br /> ABS: because of contraction due to cooling, ABS tends to lift away from the glass build plate. This is worse for square corners; round objects rarely lift. In Cu...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

PLA:
ABS: because of contraction due to cooling, ABS tends to lift away from the glass build plate. This is worse for square corners; round objects rarely lift. In Cura, specify a raft around your object. This way, the raft will (possibly) lift but your object may stay flat. When the build-plate is still cool, paint a thin layer of ABS paint (glass jar) onto the clean glass build plate. The dried ABS paint will further anchor your object to the build plate. Recommended settings are ......
HIPS:

Retrieved from "http://makerspace.tulane.edu/index.php?title=Ultimaker_2_Print_Configurations&oldid=274"