Tormach CNC Milling Machine
| Required Badge | Required PPE | ||||
|---|---|---|---|---|---|
 |
 |
 |
 |
 |
|
Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.
This machine is covered under the CNC training. Users who have not completed this training cannot use this machine.
CNC:
- When facing with a superfly on aluminum, use 2500 RPM, 12 ipm
- When facing with a 1/2" on aluminum, use 5000 RPM, 12 IPM
- If you have a tall, thin piece of stock, stabilize it on either side with 1-2-3 blocks