Workshops
In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the new MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the handouts.
| Date/Time | Topic | Instructors | |
|---|---|---|---|
| Fall 2019 date TBA -- | Inkscape I for beginners -- | Robert, Ian | |
| Fall 2019 date TBA -- | Inkscape II for intermediate users -- | Robert, Ian | |
| 9/28/19 9:30AM -- | Fusion360 I Introduction for beginners -- | Elena and Kyra | Pre-req: download software onto your laptop and bring it to class |
| 10/26/19 9:30AM -- | Fusion360 I Introduction for beginners -- | Elena and Kyra | |
| Fall 2019 date TBA -- | Fusion360 II More features -- | instructors TBA | |
| Fall 2019 date TBA -- | Meshmixer for editing STL files -- | instructors TBA | |
| Fall 2019 date TBA -- | CAD on the Carvey (requires Fusion360 I) -- | instructors TBA |
Fusion360 Introduction (enrollment limit = 12): Elena and Kyra, instructors - pre-req is to download Fusion360 onto your laptop and bring it with you Sat September 28 Sat October 26
Inkscape 2 (enrollment limit = 12): Robert and Ian, instructors - pre-req is some experience in using Inkscape, plus BYO laptop with Inkscape loaded. Sat October 5 Sun November 3
Water jet cutter (hands-on, enrollment limit = 4): Dylan and Robert, instructors - extensive pre-req at http://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training Sat October 19 Sat November 9
Handouts used in these seminars
Inkscape I for Beginners
Inkscape II for intermediate users
Fusion360 I Introduction to 3D printing
Fusion360 II More features
File:Put a filename here CAD on the Carvey
File:Put a filename here Meshmixer for editing STL files