Workshops
In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the handouts.
| Date/Time | Topic | Instructors | Pre-requisites |
|---|---|---|---|
| 10/5/19 9:30AM | Inkscape II for intermediate users | Robert, Ian? | Some experience designing with Inkscape. Bring laptop with Inkscape installed. |
| 11/3/19 9:30AM | Inkscape II for intermediate users | Robert, Ian? | Some experience designing with Inkscape. Bring laptop with Inkscape installed. |
| 9/28/19 9:30AM | Fusion360 I Introduction for beginners | Elena, Kyra | Install Fusion360 software on your laptop and bring it to class |
| 10/26/19 9:30AM | Fusion360 I Introduction for beginners | Elena, Kyra | Install Fusion360 software on your laptop and bring it to class |
| 10/19/19 9:30AM | Water Jet Cutter | Dylan?, Robert | must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand |
| 11/9/19 9:30AM | Water Jet Cutter | Dylan?, Robert | must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand |
| Fall 2019 date TBA | CAD on the Carvey (requires Fusion360 I) | instructors TBA | |
| Fall 2019 date TBA | Inkscape I for beginners | Robert, Ian | |
| Fall 2019 date TBA | Fusion360 II More features | instructors TBA |
Handouts used in these seminars
Inkscape I for Beginners
Inkscape II for intermediate users
Fusion360 I Introduction to 3D printing
Fusion360 II More features
File:Put a filename here CAD on the Carvey
File:Put a filename here Meshmixer for editing STL files