Workshops
In Spring 2020 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the Inkscape and Fusion handouts.
| Date/Time | Topic | Instructors | Pre-requisites |
|---|---|---|---|
| 3/1/2020 1:00PM | Inkscape 1 | Ian, Robert -- | must bring a laptop computer with Inkscape installed |
| 3/8/2020 1:00PM | Fusion 2 for beginners *^ | Kyra, Elena -- | must bring a laptop computer with Fusion360 installed |
| 3/15/2020 4:00PM | Inkscape 2 | Robert, Ian -- | requires Inkscape 1 or experience with Inkscape. Bring a laptop. |
^* complete "Fusion360 I Introduction to 3D printing" (below) beforehand
Handouts used in these seminars
Inkscape I for Beginners
Inkscape II for intermediate users
Fusion360 I Introduction to 3D printing
Fusion360 II More features
File:Put a filename here CAD on the Carvey
File:Put a filename here Meshmixer for editing STL files