Difference between revisions of "Bandsaw"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Machine Info)
(Machine Info)
Line 30: Line 30:
  
 
===Machine Info===
 
===Machine Info===
This machine is a Jet model JWBS-16B.  Manuals can be found at http://makerspace.tulane.edu/index.php/File:Jet_16_inch_band_saw_JWBS-16B.pdf  [[PPE]] instructions can be found XXXX.
+
This machine is a Jet model JWBS-16B.   
 +
 
 +
Manuals can be found at http://makerspace.tulane.edu/index.php/File:Jet_16_inch_band_saw_JWBS-16B.pdf   
 +
 
 +
[[PPE]] instructions can be found XXXX.
  
 
Replacement blades for this saw should be 123" long.
 
Replacement blades for this saw should be 123" long.

Revision as of 20:24, 26 December 2016

Bandsaw #1

Bandsaw #1

This is an extremely large bandsaw which is normally used for cutting metal stock or sheets.

Machine Info

This machine is a Powermatic Model 87. The manual can be found here

Powermatic Band Saw manual (.pdf) Another version can be found here Powermatic Band Saw manual v.2 (.pdf) PPE instructions can be found XXXX.


Replacement blades for this saw should be (who knows) and can be ordered from (Zeus himself?)

Bandsaw #2

Bandsaw #2

This bandsaw may be used for cutting smaller metal stock or plastic.

Machine Info

This machine is a Craftsman model 351-243981.

Manuals can be found at http://makerspace.tulane.edu/index.php/File:Sears_18_band_saw_351-243981.pdf

PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX inches long.

Bandsaw #3

Bandsaw #3

This is a large bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Small wood cuts should be made on Bandsaw #4, also located in the Wood Shop.

Machine Info

This machine is a Jet model JWBS-16B.

Manuals can be found at http://makerspace.tulane.edu/index.php/File:Jet_16_inch_band_saw_JWBS-16B.pdf

PPE instructions can be found XXXX.

Replacement blades for this saw should be 123" long.

Bandsaw #4

Bandsaw #4

This is a small bandsaw specifically used for cutting wood. It should not be used to cut materials other than wood, as they will very quickly wear out the blade. Larger wood cuts should be made on Bandsaw #3, also located in the Wood Shop.

Machine Info

This machine is a Crafstman model XXXX. Manuals can be found XXXX, PPE instructions can be found XXXX.

Replacement blades for this saw should be XXXX and can be ordered from (Fastenal/McMaster?)

Horizontal Bandsaw #1

Horizontal Bandsaw #1

This is a powerful bandsaw specifically used for cutting metal or plastic rods, tubes, and pipes. It is designed to automatically shut off when the cut is completed, and it has a clamp to hold the stock while it's cutting. Be sure to place a waste container under the chute that directs chips away from the cutting area. Stock up to 5" wide can be cut. The blade in the machine is optimized for metal and plastic. Do not use it to cut wood.

Machine Info

This machine is a Jet model 414458. The manual can be found here Jet Horizontal Band Saw manual (.pdf) PPE instructions can be found XXXX.

Replacement blades for this saw should be 64.5" x 0.5" and can be ordered from Amazon. Recommended metal cutting blade is Bosch BS6412-24M