CNC Lathe Training

From makerspace.tulane.edu
Revision as of 21:50, 18 September 2020 by Tschule (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
CNC-Lathe v2.png

This is advanced training to allow the user privileges on the Tormach CNC lathe.

Step One

Read through the step-by-step manual linked below and contact a training Ninja to make an appointment to do the hands-on portion of the training. Allow 3 hours. Lathe Training Manual

Step Two

Working with your training Ninja, create this part from a piece of 1" diameter aluminum rod

Lathe Training Part.jpeg

to demonstrate your ability to use the lathe.

This training allows for use of the lathe in "conversational" mode. If you want to use the CNC lathe to create a part that was designed in Fusion360 or Solidworks, see Lathe CAM Training.