Difference between revisions of "Digital-1 Training"

From makerspace.tulane.edu
Jump to navigation Jump to search
 
(One intermediate revision by the same user not shown)
Line 14: Line 14:
  
 
'''[https://makerspace.tulane.edu/Uploads/Training/Digital-1v2/index.html Digital-1 Presentation]'''
 
'''[https://makerspace.tulane.edu/Uploads/Training/Digital-1v2/index.html Digital-1 Presentation]'''
 +
 +
 +
[https://makerspace.tulane.edu/Uploads/Training/Digital-1_Review.pdf '''Review Training Presentation''']
  
 
===Step Two (Optional)===
 
===Step Two (Optional)===

Latest revision as of 22:11, 21 April 2021

Digital 1.png

This is the basic training for use of the simpler digital rapid prototyping tools. Completion of the Digital-1 training allows access to

Step One

Read through the presentation linked below and complete the quiz at the end.

Digital-1 Presentation


Review Training Presentation

Step Two (Optional)

Backpack Tag

a) Laser cutter: Select a piece of thin plywood from the bin labelled "Digital 1," and design and make a backpack tag for that size piece of wood like the one in the picture. Use a vector graphics software package (Illustrator, Corel Draw, Inkscape) to lay out the tag and then use the laser cutter to fabricate it from a small piece of scrap plywood. The slot for the plastic loop should have inside dimensions of 5mm x 15mm. When your tag is complete, ask the Ninja for a plastic loop.