Drill Press

From makerspace.tulane.edu
Revision as of 20:05, 28 May 2017 by Tschule (talk | contribs) (Drill Press #3)
Jump to navigation Jump to search

Drill Press #1

Drill Press #1

This drill press may be used for drilling soft metal (aluminum) or plastic.

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Metal-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Clausing model 1672.

Replacement bits for this press should be XXXX and can be ordered from (Fastenal/McMaster?)

Drill Press #2

Drill Press #2

This drill press may be used for drilling steel. It's set for high torque and low speed. It's essential to clamp your workpiece before drilling.

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Metal-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Craftsman model 137-229200.

Replacement bits for this press can be ordered from Fastenal or McMaster.

Drill Press #3

Drill Press #3

This drill press may be used for drilling wood.

Job Hazard Analysis (JHA) documents, Personal Protective Equipment (PPE) information, and Operator's Manuals can be found in the Safety and Manuals section.

This machine is covered under the Wood-1 training. Users who have not completed this training cannot use this machine.

Machine Info

This machine is a Wilton model 5816 variable speed drill press.