LulzBot TAZ 5 Print Configurations: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
 
Line 5: Line 5:
[[File:TAZ_settings.jpg|LulzBot TAZ 5 Print Configurations]]
[[File:TAZ_settings.jpg|LulzBot TAZ 5 Print Configurations]]


For
 
== '''Polymaker PolyFlex''' ==
== '''Polymaker PolyFlex''' ==
The recommended settings are:  Print temperature: 220C - 235C  ||  Heated bed: OFF
The recommended settings are:  Print temperature: 220C - 235C  ||  Heated bed: OFF


[https://www.lulzbot.com/support/taz-cura-profiles Source page (LulzBot Support)]
[https://www.lulzbot.com/support/taz-cura-profiles Source page (LulzBot Support)]

Latest revision as of 22:17, 20 November 2015

This page contains 3d printing configuration information specific to the LulzBot TAZ 5. For preparing any print for this printer, make sure that you select "Lulzbot Taz 5 (0.5 Nozzle)" under "Machine" in Cura. If that option is not present, you may need to follow the Cura configuration instructions for this printer, or may need to install the latest LulzBot version of Cura.

The recommended settings are below. Our printers are TAZ5 and the nozzle diameter is 0.50mm. These affect the recommended nozzle temperature, bed temperature, and slice thickness.

LulzBot TAZ 5 Print Configurations


Polymaker PolyFlex

The recommended settings are: Print temperature: 220C - 235C || Heated bed: OFF

Source page (LulzBot Support)