Difference between revisions of "Slicing software"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Created page with "Slicing software takes a 3-dimensional model and "slices" it into an array of two dimensional layers. These layers are communicated to a 3d printer in order to tell the p...")
 
Line 1: Line 1:
 
Slicing software takes a 3-dimensional model and "slices" it into an array of two dimensional layers.  These layers are communicated to a [[3d printer]] in order to tell the print head where to travel as it extrudes each layer of the print.   
 
Slicing software takes a 3-dimensional model and "slices" it into an array of two dimensional layers.  These layers are communicated to a [[3d printer]] in order to tell the print head where to travel as it extrudes each layer of the print.   
  
Most slicing software starts with an [[.stl]] file and outputs the [[g-code]] file which contains the necessary instructions for the 3d printer.
+
Most slicing software starts with an [[.stl]] file and outputs the [[G-code]] file which contains the necessary instructions for the 3d printer.
  
 
Examples of slicing software include [[Cura]] and [[Slicer]].
 
Examples of slicing software include [[Cura]] and [[Slicer]].

Revision as of 02:57, 29 September 2015

Slicing software takes a 3-dimensional model and "slices" it into an array of two dimensional layers. These layers are communicated to a 3d printer in order to tell the print head where to travel as it extrudes each layer of the print.

Most slicing software starts with an .stl file and outputs the G-code file which contains the necessary instructions for the 3d printer.

Examples of slicing software include Cura and Slicer.