Tormach CNC Lathe

From makerspace.tulane.edu
Revision as of 22:38, 7 July 2017 by Cschober (talk | contribs)
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

CNC Lathe Training 1:

1)

  • Fit the chuck key into the chuck and rotate until the chuck is wide enough to accept your 1" piece of stock.
  • Take the stop tool and ensure that you have a minimum of 3" of stock sticking out of the chuck.
  • Tighten up the chuck with an extra tug, spin the chuck to make sure that the stock is properly secured.
  • Take the chuck key and put it on the workbench (it's very dangerous to leave them unaccounted for)

2)

  • Remove whatever tool is in the quick change tool post holder and place it on the workbench
  • Blow compressed air onto the empty holder to clear all chips and debris
  • Load tool 1 (RH turning tool) into the tool holder and secure the tool
  • In the computer, click the "main" tab and type in "T01" into the text box that faintly reads "MDI". This informs the lathe that it is cutting with tool 1.

3)

Retrieved from "http://makerspace.tulane.edu/index.php?title=Tormach_CNC_Lathe&oldid=196598"