Workshops: Difference between revisions

From makerspace.tulane.edu
Jump to navigation Jump to search
No edit summary
No edit summary
Line 50: Line 50:
|CAD on the Carvey (requires Fusion360 I)
|CAD on the Carvey (requires Fusion360 I)
|instructors TBA
|instructors TBA
|-
|---------------------
|------------------------------------------
|---------------------
|
|}
|}



Revision as of 14:09, 16 September 2019

Instructors Ian Pimenta and Robert Johnson with Physics Professor Jessica Graber, after Inkscape I workshop. photo credit: Prof. Katherine Raymond

In Fall 2019 we'll again be offering student-taught tutorials on popular software used in the Scot Ackerman MakerSpace. Classes meet in SE124, the new MakerSpace Project Room. Enter from the alley next to Flower Hall. Invitations are sent to all registered MakerSpace users early each week. We have seating for 10 learners. Bring your laptop, with the software already loaded, and our Maker Ninjas will help you learn new skills. Thanks to the Makers and Robotics Society (MARS) for developing the handouts.

Date/Time Topic Instructors Pre-requisites
Fall 2019 date TBA Inkscape I for beginners Robert, Ian
10/5/19 9:30AM Inkscape II for intermediate users Robert, Ian? Some experience designing with Inkscape. Bring laptop with Inkscape installed.
11/3/19 9:30AM Inkscape II for intermediate users Robert, Ian? Some experience designing with Inkscape. Bring laptop with Inkscape installed.
9/28/19 9:30AM Fusion360 I Introduction for beginners Elena, Kyra Install Fusion360 software on your laptop and bring it to class
10/26/19 9:30AM Fusion360 I Introduction for beginners Elena, Kyra Install Fusion360 software on your laptop and bring it to class
Fall 2019 date TBA Fusion360 II More features instructors TBA
10/19/19 9:30AM Water Jet Cutter Dylan?, Robert must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
11/9/19 9:30AM Water Jet Cutter Dylan?, Robert must complete https://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training beforehand
Fall 2019 date TBA CAD on the Carvey (requires Fusion360 I) instructors TBA


Water jet cutter (hands-on, enrollment limit = 4): Dylan and Robert, instructors - extensive pre-req at http://makerspace.tulane.edu/index.php/Water_Jet_Cutter_Training Sat October 19 Sat November 9




Handouts used in these seminars


Inkscape I for Beginners


Inkscape II for intermediate users


Fusion360 I Introduction to 3D printing


Fusion360 II More features


File:Put a filename here CAD on the Carvey


File:Put a filename here Meshmixer for editing STL files