Difference between revisions of "User:Jschust5"

From makerspace.tulane.edu
Jump to navigation Jump to search
(Tulane Makerspace Project Portfolio)
(OpenSource 3D Printer)
Line 28: Line 28:
[https://www.youtube.com/channel/UCs3DtQdvaa5NtlPvjeaVfjA Exorcist3D YouTube Channel]
[https://www.youtube.com/channel/UCs3DtQdvaa5NtlPvjeaVfjA Exorcist3D YouTube Channel]
==OpenSource 3D Printer==
In 2013, I built my own opensource 3D Printer.  I modified the Prusa i3 design.  Controlled by: Arduino Mega + RAMPS 1.5 with Sprinter firmware.
The frame is made from 1/4" laser cut steel plates and 3/4" lathe turned rods.  The build surface is heated and 10" x 10" x 10".  Recently, I made several
improvements and upgrades, which include a large screen graphical LCD with SD card reader and a genuine E3D titan extruder. 
Future upgrades include a BL Touch auto bed level and 1.75mm E3D V6 Nozzle.
    Several of the parts I printed in the Makerspace:
    * Tan LCD display box
    * Purple X-axis belt tension bracker
    * Purple Arduino & Ramps box
    * Purple Printer cooler fan shroud
<li style="display: inline-block;"> [[File:3D printer.JPG|thumb|none|300px|Exorcist3D Printer]] </li>
<li style="display: inline-block;"> [[File:Buda.JPG|thumb|none|300px|3mm Budaschnozzle to be replaced]] </li>
<li style="display: inline-block;"> [[File:3D Printer Jason2.JPG|thumb|none|300px|View from above]] </li>
<li style="display: inline-block;"> [[File:Upgrades.JPG|thumb|none|300px|Upgrades Waiting: 1.75mm E3D V6 & BL Touch]]
<br />
==1934 South Bend Lathe Restoration & Projects==
==1934 South Bend Lathe Restoration & Projects==

Revision as of 14:17, 26 September 2018

  • I don't always wear a dress shirt and tie to the Makerspace, but when I do, you know I was photoshopped!
  • Bio

    This is my homepage, which I don't use.

    Jason Schuster

    Maker Ninja

    PhD Candidate

    Department of Biomedical Engineering

    Lab Website: Biomechanics of Growth & Remodeling Lab

    Email: jschust5@tulane.edu

    Maker Skills:

    Tulane Makerspace Project Portfolio

    Exorcist3D YouTube Channel

    Here's my YouTube channel, several videos of my 3D printer and South Bend lathe are found here:

    Exorcist3D YouTube Channel

    1934 South Bend Lathe Restoration & Projects

    Over Christmas break 2017, I machined some small parts for my lab. These parts are cannula, used to mount soft tissues on our inflation-extension test device. The material is PEEK plastic, it can be auto-claved and machines nicely. Check out my YouTube link above, there is a quick video of the PEEK being machined. The lathe I used is a 1934 Southbend 9" Workbench 405. This lathe is a restoration project I completed in 2010.

    • 3.0mm Cannula
    • 1/8"NPT to 3.8mm Cannula
    • 1934 Southbend 405 Lathe
    • X-axis fine adjustment
    • Updated tooling post

    Last Update

    JasonS 17 January 2018