People
Dr. Cedric Walker
MakerSpace Director
Email: cfw@tulane.edu
Phone: (504) 865-5866
Office: SSE125, in the MakerSpace
Dr. Timothy Schuler
MakerSpace Advisor
Email: tschule@tulane.edu
Phone: (504) 865-5086
Office: 4059 Percival Stern Hall
John Sullivan
MakerSpace Advisor
Email: johns@tulane.edu
Phone: (504) 865-5853
Office: 533 Lindy Boggs Building
Maker Ninjas
The Scot Ackerman MakerSpace is run by student workers. We call them Maker Ninjas. They are helpful and knowledgeable, but their first obligation is to ensure safe operation of the MakerSpace. In the past, frequent users of the MakerSpace were identified by current Ninjas and were invited to apply for a position as a new Maker Ninja. To be considered for hiring, a user must first demonstrate broad basic competencies by completing the requirements for these credentials:
- Digital-1
- Wood-1
- Metal-1
- Metal-2
- Electronics
This will allow use of all tools in the main shop area and Mezzanine, except for the water jet cutter, CNC Lathe and CNC Mill. All prospective Ninja candidates are interviewed, and their project portfolios are reviewed.
During their first year of work as a Ninja, the following additional competencies must be earned in order to continue as a Ninja in the second year:
- Digital-2
- Either Wood-2 or [CNC-Lathe and CNC-Mill]
- Water Jet.
Newly hired Ninjas start at a salary of $10.00 per hour. After satisfactorily working for two semesters, their pay will increase by $1.00 per hour. Ninjas who have completed all of the trainings will receive an additional $1.00 per hour, so that a fully trained Ninja with at least 2 semesters of experience will earn $12.00 per hour.
- Current and past Maker Ninjas, with year of graduation. E-mail address is shown for current Maker Ninjas
-
Caroline Culp (cculp@tulane.edu), 2022
-
Elena Lompado (Elompado@tulane.edu), 2022
-
Adriana L Duncan (aduncan3@tulane.edu), 2021
-
Ian J Pimenta (ipimenta@tulane.edu), 2021
-
Kyra Rubinstein (krubinstein@tulane.edu), 2021
-
Lewis E Greenstein (lgreenstein@tulane.edu), 2021
-
Robert Johnson (rjohnson1@tulane.edu), 2021
-
Afsheen Sajjadi (asajjadi@tulane.edu), 2020
-
Claire Davis (cdavis44@tulane.edu), 2020
-
Cole Greishop (cgriesho@tulane.edu), 2020
-
Dylan A Lucia (dlucia1@tulane.edu), 2020
-
Kaleb Branch (branchkaleb@gmail.com), 2020
-
Marco I Mirnics (mmirnics@tulane.edu), 2020
-
Mason O'Connor (moconnor1@tulane.edu), 2020
-
Meghan E Bush (mbush7@tulane.edu), 2020
-
Samuel W Belden (sbelden1@tulane.edu), 2020
-
Sierra "Rae" Mills (smills5@tulane.edu), 2020
-
Timothy Au (tau@tulane.edu), 2020
-
Victoria A Rose (vrose@tulane.edu), 2020
-
Daniel Mena Caroll, 2019
-
Elise M Moore, 2019
-
Joshua E Yao, 2019
-
Luke Artzt, 2019
-
Nathan P Nguyen, 2019
-
Andrew W Begeman, 2018
-
Antonius Prader, 2018
-
Chase B Schober, 2018
-
Daniel Capone, 2018
-
Ethan W Gasta, 2018
-
Jason D Schuster, 2018
-
Lianna Mae Smith, 2018
-
Matthew W Nice, 2018
-
Max Woody, 2018
-
Sarah E Holt, 2018
-
Theodore Steffens, 2018
-
Alexander Brown, 2017
-
Allen Zhang, 2017
-
Ben Lewson, 2017
-
Celeste White, 2017
-
Cody O'Cain, 2017
-
Daley W Seaton, 2017
-
David Kearing, 2017
-
Joe Sweeney, 2017
-
Jonathan Nguyen, 2017
-
Ryan Fishel, 2017
-
Taylor McCrady, 2017
-
Francis McMahon, 2016
-
Maddy Bishop-Van Horn, 2016
Faculty & Staff Collaborators
Prof. Adam Crosson acrosson@tulane.edu runs the sculpture studio in the Art Department, and is available to help students with welding, casting, plasma cutting, and other "hot metal" operations
Faculty and staff members who would like to be associated with the MakerSpace should contact Director Cedric Walker.